• Make sure your Earbuds and the mobile device are within the 10m range to each other
  • Low battery level may cause the disconnection from the mobile
  • If the battery level is less than 5% charge the Earbuds
  • If the battery level is more than 5% proceed with the next step

Note: Visibility of the battery level is subjective and may vary brand to brand 

Chances are, you might have an issue with the mobile. You can check if the Earbuds is working well using a different mobile. If the issue still persists with an alternate device proceed with raising a complaint on our website. 

 

Check for the battery level of the headset

 

  • Tap and hold the Bluetooth icon on your mobile
  • Look for  Air Buds Pro and check the battery level

 

How to Unpair from the mobile

 

  • Tap and hold the Bluetooth icon on your mobile
  • Tap on the Noise Buds Beads
  • Forget / Delete Air Buds Pro  from paired Bluetooth devices


Pairing with a new device



1. Make sure your Noise Beads is fully charged before beginning with the reset

2. Forget / Delete Noise Beads from paired Bluetooth devices

3. Turn off the Bluetooth of the device

4. Open the charging case.

5.Take out the earbuds from the charging case

6. Fast tab both earbuds 5 times , 3 times white LED will indicate Factory RESET

7.Place both the earbuds inside the charging case

8. Repeat the pairing process