1. How to connect 2 Sound Master with each other?

Dual Speaker Connectivity functions under Bluetooth mode

• Turn on both speakers. Ensure one speaker is connected to your device, and the other is in pairing mode (not connected to any device).

• The connected speaker acts as the main one, and the one in pairing mode becomes the secondary speaker.

• Hold the Bluetooth button on the main speaker for 3 seconds to initiate pairing with the secondary speaker.

• Once paired, the Bluetooth indicators on both speakers will confirm the connection.

• You can now enjoy synchronized playback on both speakers in Dual Speaker Connectivity mode.

• To disconnect or turn off Dual Speaker Connectivity, hold the Bluetooth button on any speaker for 3 seconds.

Note: Only 2 Noise Sound Master speakers can be connected with each other in this mode.  Sound Master cannot be connected with any other speaker."

Bluetooth LED Indicator (Dual Speaker Connectivity Mode):

 Blinks Fast on Both Speakers: Devices are waiting for a connection.

Blinks Slowly on Both Speakers: Devices are connected in Dual Speaker Connectivity mode, but no audio

is playing.

Constantly Activated on Both Speakers: Devices are connected in Dual Speaker Connectivity mode, and

audio is playing.

Blinks Slowly on the main speaker, constantly activated on the secondary: Devices are connected

in Dual Speaker Connectivity mode, and audio playback is paused."

2. How to connect Sound Master by using NFC?

"If your device supports NFC, you can use it for quick Bluetooth pairing.

• Enable Bluetooth and NFC functions on your device.

• Place your smartphone NFC area in the NFC zone on the speaker.

• The devices will automatically pair, allowing for quick and hassle-free connection.

• To disconnect using NFC, place your smartphone in the NFC zone again.

NFC for IOS Devices works only for Apple Pay, Hence connecting Sound Master with phones/iPad/Etc. is NOT available. Direct Bluetooth pairing however is easily possible. "

3. How to connect Sound Master by using AUX Cable?

"• Plug one end of the 3.5 mm AUX cable into your external device and the other end

 to the speaker.

• Your Noise Sound Master can now play music via AUX."

AUX LED Indicator

Constantly Activated: The speaker is connected via AUX."